Checkout:

Carbide Brushes

Can be used in combination with our other products to smooth off surfaces that have been descaled.

Carbide Brushes

$21.98$27.88

The carbide brush has many applications, but we produce them initially for the spray coating trade as a preparation brush to remove debris and roughen the surface of pipes before the coating process.

Since then, we have received feedback from clients who use them for removing light scale in drain pipes, and even chimney cleaning techniques.

These brushes can be used in combination with our other products to smooth off surfaces that have been descaled. They are perfect for removing dust or light mineral deposits in PVC or fragile pipes.

Sizes range from 50mm (2″) to 170mm (6.7″).

Suitable for flexible shaft diameter 8mm (5/16″), 10mm (3/8″) & 12mm (1/2″).

Perfect for preparing pipes for relining with the Picote Brush Coating system, Lining Cannon or any other relining system that you are using.

 

Carbide Brush DN50mm/2″ for 8mm (5/16″) Shaft
Carbide Brush DN75mm/3″ for 8mm (5/16″) Shaft
Carbide Brush DN110mm/4.4″ for 8mm (5/16″) Shaft
Carbide Brush DN125mm/5″ for 8mm (5/16″) Shaft
Carbide Brush DN170mm/6.7″ for 8mm (5/16″) Shaft
Carbide Brush DN75mm/3″ for 10mm (3/8″) Shaft
Carbide Brush DN110mm/4.4″ for 10mm (3/8″) Shaft
Carbide Brush DN125mm/5″ for 10mm (3/8″) Shaft
Carbide Brush DN170mm/6.7″ for 10mm (3/8″) Shaft
Carbide Brush DN75mm/3″ for 12mm (1/2″) Shaft
Carbide Brush DN110mm/4.4″ for 12mm (1/2″) Shaft
Carbide Brush DN125mm/5″ for 12mm (1/2″) Shaft
Carbide Brush DN170mm/6.7″ for 12mm (1/2″) Shaft

Points to note:

These products are intended to be used by trained professionals in the sewer cleaning trade. They do not come with instructions. If you would like training please make contact with us, and we will guide you.

Product pictures may vary in color and design depending on the size and diameter that you order.

You might also like: