Mini Mole

The Mini Mole is made for smaller diameter pipes.  It can be used on its own or in conjunction with a chain which does not have a drill head.

Drain Cleaning Mini Mole


This drill head does not have the traditional hard metal bits fused to the cutting edge. Instead, we have machined a series of crests and troughs which prevents damage to the pipe wall. This makes the tool suitable for both PVC plastic pipes as well as metal pipes.

The vertical recesses in the mole are cut at an angle to encourage  the loose debris backwards from the head when it rotates.

It is made from stainless steel to prevent oxidation, and is fastened to the flexible shaft with set screws.

This Mini Mole mounts to a 6mm (1/4″),  8mm (5/16″) , 10mm (3/8″) & 12mm (1/2″) flexible shaft.

This tool would be perfect to use with your Picote Mini Miller, and Ridgid K9-102 FlexShaft® or your Ridgid K9-204 FlexShaft® Machine.

Points to note:

These products are intended to be used by trained professionals in the sewer cleaning trade. They do not come with instructions. If you would like training please make contact with us, and we will guide you.

Product pictures may vary in color and design depending on the size and diameter that you order.

We do not claim to be producing original parts for any of the brands mentioned above.


They come in the following sizes;

18mm (5/8″) for 6mm (1/4″) Shaft

30mm (1.2″) for 6mm (1/4″) Shaft

30mm (1.2″) for 8mm (5/16″) Shaft

30mm (1.2″) for 10mm (3/8″) Shaft

30mm (1.2″) for 12mm (1/2″) Shaft

You might also like: