Checkout:

Nylon Brushes

This is a coating and cleaning brush used for a variety of purposes.

$7.72$17.38

This is a coating and cleaning brush used for a variety of purposes. Pipe coating specialists use our brushes to prepare plumbing pipes for spray coating. It is the perfect tool for removing dust or light mineral deposits in drain lines that have been cleaned with a chain knocker or circular chain.
Use the brushes to center other tools in the pipe, when reinstating plumbing junctions, or use the nylon brushes in combination with other tools for directing dust from the work surface. We highly recommend using a brush lock to secure your brush to the shaft, because the brushes have got nylon screws that are not as strong as the steel set screws on a brush lock. This will prevent the possibility of losing your brush in the drainpipe.
The brushes mount to a 6mm (1/4″), 8mm (5/16″), and 10mm (3/8″) flexible shaft with set screws.
Brush diameters vary from 32mm (1.3″) to 260mm (10.4″)
Perfect for preparing pipes for relining with the Picote Brush Coating system, Lining Cannon or any other relining system that you are using.
We have a large selection of nylon brushes available in stock. We only keep the most commonly requested sizes here on this webpage, but please get in touch with us if you need a specific size or bristle thickness.

These are some of the brushes that we are able to supply but are not available on the website:

 

Nylon Brush DN32mm/1.3″, 0.2 bristle for 6mm (1/4″) Shaft
Nylon Brush DN50mm/2″, 0.35 bristle for 6mm (1/4″) Shaft
Nylon Brush DN50mm/2″, 0.5 bristle for 6mm (1/4″) Shaft
Nylon Brush DN75mm/3″, 0.35 bristle for 6mm (1/4″) Shaft
Nylon Brush DN75mm/3″, 0.5 bristle for 6mm (1/4″) Shaft
Nylon Brush DN80mm/3.1″, 0.35 bristle for 6mm (1/4″) Shaft
Nylon Brush DN50mm/2″, 0.35 bristle for 8mm (5/16″) Shaft
Nylon Brush DN50mm/2″, 0.5 bristle for 8mm (5/16″) Shaft
Nylon Brush DN75mm/3″, 0.35 bristle for 8mm (5/16″) Shaft
Nylon Brush DN75mm/3″, 0.5 bristle for 8mm (5/16″) Shaft
Nylon Brush DN75mm/3″, 0.7 bristle for 8mm (5/16″) Shaft
Nylon Brush DN80mm/3.1″, 0.35 bristle for 8mm (5/16″) Shaft
Nylon Brush DN110mm/4.4″, 0.7 bristle for 8mm (5/16″) Shaft
Nylon Brush DN125mm/5″, 0.7 bristle for 8mm (5/16″) Shaft
Nylon Brush DN175mm/7″, 0.7 bristle for 8mm (5/16″) Shaft
Nylon Brush DN210mm/8.4″, 0.8 bristle for 8mm (5/16″) Shaft
Nylon Brush DN110mm/4.4″, 0.7 bristle for 10mm (3/8″) Shaft
Nylon Brush DN130mm/5.2″, 0.7 bristle for 10mm (3/8″) Shaft
Nylon Brush DN160mm/6.4″, 0.7 bristle for 10mm (3/8″) Shaft
Nylon Brush DN180mm/7.2″, 0.7 bristle for 10mm (3/8″) Shaft
Nylon Brush DN210mm/8.4″, 0.8 bristle for 10mm (3/8″) Shaft
Nylon Brush DN225mm/9″, 0.8 bristle for 10mm (3/8″) Shaft
Nylon Brush DN260mm/10.4″, 0.8 bristle for 10mm (3/8″) Shaft

If you would like to order these or any other brush size that is not available on the options on our website, please send us an email: office@plumber-tools.com

Points to note:

These products are intended to be used by trained professionals in the sewer cleaning trade. They do not come with instructions. If you would like training please make contact with us, and we will guide you.

Product pictures may vary in color and design depending on the size and diameter that you order.

You might also like: